 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Makita HR3000C 1-3/16" Rotary Hammer (SDS, Variable Speed) - "Rotation Only," "Hammering w/ Rotation" and "Hammering Only" |
Makita HR3000C 1-3/16" Rotary Hammer (SDS, Variable Speed) -
"Rotation Only," "Hammering w/ Rotation" and "Hammering Only"
Features
Electronic variable speed control dial (360 - 720 RPM)
Reduced vibration for less operator fatigue
Torque limiting system ensures stable drilling in all materials
No hammering when idling ensures longer tool life
LED light indicates when to replace carbon brushes and if there is a problem with the power
source
Low noise only 103 dB
One touch sliding chuck for easy bit installation and removal
Externally accessible brushes for fast and easy job-site serviceability
Straight side handle rotates 360°
Ball clutch torque limiter ensures stable torque
Large comfortable trigger switch
24 bit angle settings adjust the bit to the desired position for operator convenience
Double insulated
From the Manufacturer
This 3/16-inch SDS rotary hammer from Makita features three modes of operation: rotation,
hammering, or hammering with rotation. The electronic variable-speed control dial along with
the torque limiting system ensures stable torque drilling in all materials. Reduced vibration
and low noise (103 dB) mean less operator fatigue. For longer tool life, Makita designed this
tool to stop hammering at idle. Bit installation is a snap with this hammer’s one-touch sliding
chuck. The side handle rotates 360 degrees for convenient operation. A handy indicator light
indicates when it’s time to replace those brushes, which are externally accessible for fast
and easy replacement on the job site. This rotary hammer is double insulated and features 24-
bit angle settings. Your purchase includes depth gauge, bit grease, and plastic tool case
Product Description
SDS hammer has three modes: rotation only, rotation with hammering and hammering only.
Torque-rich 8.2 Volt motor breezes through concrete and other materials. Cordless: No,
Rated RPM: 360 - 720, Amps: 8.2, Variable Speed: Yes, Hammering Modes: Rotation ONly,
Hammering Only, Hammering with Rotation, Impact Energy (J): 5.3, Blows Per Minute (BMP):
1,650 - 3,300, Case Included: Yes
"Rotation Only," "Hammering w/ Rotation" and "Hammering Only"
Features
Electronic variable speed control dial (360 - 720 RPM)
Reduced vibration for less operator fatigue
Torque limiting system ensures stable drilling in all materials
No hammering when idling ensures longer tool life
LED light indicates when to replace carbon brushes and if there is a problem with the power
source
Low noise only 103 dB
One touch sliding chuck for easy bit installation and removal
Externally accessible brushes for fast and easy job-site serviceability
Straight side handle rotates 360°
Ball clutch torque limiter ensures stable torque
Large comfortable trigger switch
24 bit angle settings adjust the bit to the desired position for operator convenience
Double insulated
From the Manufacturer
This 3/16-inch SDS rotary hammer from Makita features three modes of operation: rotation,
hammering, or hammering with rotation. The electronic variable-speed control dial along with
the torque limiting system ensures stable torque drilling in all materials. Reduced vibration
and low noise (103 dB) mean less operator fatigue. For longer tool life, Makita designed this
tool to stop hammering at idle. Bit installation is a snap with this hammer’s one-touch sliding
chuck. The side handle rotates 360 degrees for convenient operation. A handy indicator light
indicates when it’s time to replace those brushes, which are externally accessible for fast
and easy replacement on the job site. This rotary hammer is double insulated and features 24-
bit angle settings. Your purchase includes depth gauge, bit grease, and plastic tool case
Product Description
SDS hammer has three modes: rotation only, rotation with hammering and hammering only.
Torque-rich 8.2 Volt motor breezes through concrete and other materials. Cordless: No,
Rated RPM: 360 - 720, Amps: 8.2, Variable Speed: Yes, Hammering Modes: Rotation ONly,
Hammering Only, Hammering with Rotation, Impact Energy (J): 5.3, Blows Per Minute (BMP):
1,650 - 3,300, Case Included: Yes
Makita HR3000C
1-3/16" Rotary Hammer (SDS, Variable Speed) -
"Rotation Only," "Hammering w/ Rotation" and
"Hammering Only"
In the Box
Depth gauge (322213-6)
Bit grease (181573-3)
Plastic tool case (824445-6)
SPECIFICATIONS
Capacity Concrete: (with core bits) 3-1/2"
No load speed: 360 - 720 rpm
Blows per minute: 1,650 - 3,300 bpm
Impact energy: 5.3J
Amps: (115V) 8.2
Overall length: 15-3/8"
Net weight: 10.6 lbs
Shipping weight: 22.0 lbs
1-3/16" Rotary Hammer (SDS, Variable Speed) -
"Rotation Only," "Hammering w/ Rotation" and
"Hammering Only"
In the Box
Depth gauge (322213-6)
Bit grease (181573-3)
Plastic tool case (824445-6)
SPECIFICATIONS
Capacity Concrete: (with core bits) 3-1/2"
No load speed: 360 - 720 rpm
Blows per minute: 1,650 - 3,300 bpm
Impact energy: 5.3J
Amps: (115V) 8.2
Overall length: 15-3/8"
Net weight: 10.6 lbs
Shipping weight: 22.0 lbs
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
