 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Makita Nailer AN942 Framing Nailers - 31° Clipped Head |
Makita Nailer AN942 Framing Nailers - 31° Clipped Head
Technical Details
Fires standard 2" to 3-1/2" (31°) clipped head stick nails
Nail depth selector dial can be adjusted to nine different depths to match application
Light weight (8.4 lbs.) and perfectly balanced for easy operation
Large capacity air chamber for increased power
Nose piece with sure-grip spikes prevents slipping
Non-marring nose adaptor prevents scratching of work
Easy load magazine; just insert nails and pull back on pusher block
Ergonomic handle with rubber grip
Nail mode selector provides sequential or bounce fire for increased flexibility
Built-in air filter
Rubber bumper protects tool housing
Dry fire prevention system prolongs life of tool
Silent sheet reduces noise when disconnecting coupler
From the Manufacturer
Check out this lightweight (only 8.4 lbs.) yet sturdy framing nailer. The Makita AN942 fires 2"
to 3-1/2" standard clipped head stick nails and the easy load rugged aluminum magazine is
as simple as inserting the nails and pulling back on the pusher rod. A built-in ceramic air
filter system prevents debris from entering the tool, extending tool life and reducing down
time, and the 9 quick-dial depth adjustment settings give you precise control of nail depth.
Designed with a contoured handle with a conforming rubber grip for operator comfort and
a three mode selector switch for either "bump" or "sequential" operation and an "off"
setting for safe transporting.
Product Description
Amazon.com Product Description
Check out this lightweight (only 8.4 pounds) yet sturdy framing nailer. The Makita AN942
fires 2 to 3-1/2-inch standard clipped head stick nails, and the easy-load rugged aluminum
magazine is as simple as inserting the nails and pulling back on the pusher rod. A built-in
ceramic air filter system prevents debris from entering the tool, extending tool life and
reducing downtime, and the nine quick-dial depth adjustment settings give you precise
control of the nail depth. This model is designed with a contoured handle that has a
conforming rubber grip for operator comfort and a three-mode selector switch for either
"bump" or "sequential" operation and an "off" setting for safe transporting. The nailer
comes with a nose adaptor, oil supply, safety glasses, and operating manual.
Product Description
Makitas AN942 pneumatic framing nailer is a lightweight (only 8.4 lbs.) yet sturdy framing
nailer, firing 2in. to 3 1/2in., 31deg paper collated clipped- head nails. The easy-load,
rugged aluminum magazine is as simple as inserting the nails and pulling back on the
pusher rod. A built-in ceramic air filter system prevents debris from entering the tool,
extending tool life and reducing down time. The 9 quick-dial depth adjustment settings
give you precise control of nail depth. Nose piece with sure-grip spikes prevents slipping.
Operating PSI: 65 - 120, Fastners Used: Framing Nails, Fastner Sizes (in.): 2 - 3 1/2,
Adjustable Depth Contol: Yes, Coil or Strip: Strip, Inlet Size (in.): 1/4, Min. Hose Size (in.):
3/8, Case Included: No, Tool Length (in.): 8.4, Tool Weight (lbs.): 17 3/4
Technical Details
Fires standard 2" to 3-1/2" (31°) clipped head stick nails
Nail depth selector dial can be adjusted to nine different depths to match application
Light weight (8.4 lbs.) and perfectly balanced for easy operation
Large capacity air chamber for increased power
Nose piece with sure-grip spikes prevents slipping
Non-marring nose adaptor prevents scratching of work
Easy load magazine; just insert nails and pull back on pusher block
Ergonomic handle with rubber grip
Nail mode selector provides sequential or bounce fire for increased flexibility
Built-in air filter
Rubber bumper protects tool housing
Dry fire prevention system prolongs life of tool
Silent sheet reduces noise when disconnecting coupler
From the Manufacturer
Check out this lightweight (only 8.4 lbs.) yet sturdy framing nailer. The Makita AN942 fires 2"
to 3-1/2" standard clipped head stick nails and the easy load rugged aluminum magazine is
as simple as inserting the nails and pulling back on the pusher rod. A built-in ceramic air
filter system prevents debris from entering the tool, extending tool life and reducing down
time, and the 9 quick-dial depth adjustment settings give you precise control of nail depth.
Designed with a contoured handle with a conforming rubber grip for operator comfort and
a three mode selector switch for either "bump" or "sequential" operation and an "off"
setting for safe transporting.
Product Description
Amazon.com Product Description
Check out this lightweight (only 8.4 pounds) yet sturdy framing nailer. The Makita AN942
fires 2 to 3-1/2-inch standard clipped head stick nails, and the easy-load rugged aluminum
magazine is as simple as inserting the nails and pulling back on the pusher rod. A built-in
ceramic air filter system prevents debris from entering the tool, extending tool life and
reducing downtime, and the nine quick-dial depth adjustment settings give you precise
control of the nail depth. This model is designed with a contoured handle that has a
conforming rubber grip for operator comfort and a three-mode selector switch for either
"bump" or "sequential" operation and an "off" setting for safe transporting. The nailer
comes with a nose adaptor, oil supply, safety glasses, and operating manual.
Product Description
Makitas AN942 pneumatic framing nailer is a lightweight (only 8.4 lbs.) yet sturdy framing
nailer, firing 2in. to 3 1/2in., 31deg paper collated clipped- head nails. The easy-load,
rugged aluminum magazine is as simple as inserting the nails and pulling back on the
pusher rod. A built-in ceramic air filter system prevents debris from entering the tool,
extending tool life and reducing down time. The 9 quick-dial depth adjustment settings
give you precise control of nail depth. Nose piece with sure-grip spikes prevents slipping.
Operating PSI: 65 - 120, Fastners Used: Framing Nails, Fastner Sizes (in.): 2 - 3 1/2,
Adjustable Depth Contol: Yes, Coil or Strip: Strip, Inlet Size (in.): 1/4, Min. Hose Size (in.):
3/8, Case Included: No, Tool Length (in.): 8.4, Tool Weight (lbs.): 17 3/4
Makita Nailer AN942
Framing Nailers - 31° Clipped Head
In The Box
Nose Adaptor (421677-2)
Oil supply (181434-7)
Safety glasses (1922-A)
Specifications
Operating Air Pressure (PSIG) 65 - 120
Nail Size 2" - 3-1/2"
Nail Diameter .113 - .131 (paper or wire
collated)
Size (L x H x W) 17-3/4" x 14-3/4" x 4-3/8"
Net Weight (lbs.) 8.4
Shipping Weight (lbs.) 12.1
Framing Nailers - 31° Clipped Head
In The Box
Nose Adaptor (421677-2)
Oil supply (181434-7)
Safety glasses (1922-A)
Specifications
Operating Air Pressure (PSIG) 65 - 120
Nail Size 2" - 3-1/2"
Nail Diameter .113 - .131 (paper or wire
collated)
Size (L x H x W) 17-3/4" x 14-3/4" x 4-3/8"
Net Weight (lbs.) 8.4
Shipping Weight (lbs.) 12.1
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
