 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Makita Impact Driver BTD140 - 18V LXT Lithium-Ion Cordless Impact Drivers Kit |
Makita Impact Driver BTD140 - 18V LXT Lithium-Ion Cordless Impact Drivers Kit
Technical Details
LXT Lithium-Ion battery and optimum charging system produces 280% more lifetime work
with 2x more cycles.
Makita built 4-pole maximum torque motor delivers 1,280 in. lbs. of efficient torque in a
compact size.
50% more compact design at only 5-3/4" long and weighs only 3.3 lbs. for less operator
fatigue
LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16
firm holding contact terminals (for constant high power)
Makita's proprietary hammer and anvil are made using the highest quality steel and heat
hardened to last longer.
Product Description
Amazon.com Review
We’ve come a long way from sweat and a screwdriver. A hundred years ago, builders would
never have envisioned a tool as powerful and efficient as this one. Heck, even 20 years
ago. Science has ushered battery technology along, and the LXT Lithium-Ion system that
powers this impact driver has a ton of advantages over standard NiMH or NiCad batteries.
The Lithium-Ion technology means 1,400 battery life cycles, longer run time, lighter weight,
a great reduction in the self-discharge rate and built-in shock-absorbing features to
protect your battery.
But perhaps the coolest innovation is what Makita calls its 45-minute Optimum Charger. It
actually talks to the batteries it charges throughout the cycle, using a built-in memory chip
in the battery and, believe it or not, a CPU chip in the charger itself, which analyzes the
data stored in the battery chip to decide on the best charging method at that time.
Slide one of these batteries onto the supremely designed impact driver and you’ll be
amazed at what you can do. Despite its size (for the record, it’s 5-3/4 inches long and
weighs barely 3 pounds), this driver kicks out an unbelievable 1,280 in./lbs. of efficient
torque, a no-load speed of 2,300 rpm and 3,200 blows per minute, putting it way out in front
of the pack. We really like the integrated worklight, too. It illuminates as soon as you pull
the trigger, and it stays on for 10 seconds or so after you release the trigger, too – a handy
little feature.
Makita always made ergonomically positive tools that feel good in your hand and take the
strain off your body, and this one’s no exception. The slightly curved grip is so
comfortable, and because it’s super compact and lightweight, this driver’s an absolute
pleasure to run. -- Kris Jensen-Van Heste
Features:
Makita built, 4-pole maximum torque motor delivers 1,280 in. lbs. of efficient torque in a
compact size.
50% more compact design at only 5-3/4" long and weighs only 3.3 lbs. for less operator
fatigue.
Ergonomic shape fits like a glove with even pressure and easy control.
LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16
firm holding contact terminals (for constant high power).
30-minute rapid charger and battery communicates throughout the charging process using
the built-in chip in the battery and built-in CPU chip in the charger. The Charger also uses
"Active 3 Control" for current control, thermal control & voltage control.
Charger has a built-in fan to cool the battery to produce more lifetime work.
Built-in L.E.D. light for more illuminated work.
Makita proprietary hammer and anvil are made using the highest quality steel and heat
hardened to last longer.
Electric brake for immediate stops and minimizes kickback.
Two-piece armature and field along with externally accessible brushes for serviceability
and longer motor life.
3-Year warranty.
Technical Details
LXT Lithium-Ion battery and optimum charging system produces 280% more lifetime work
with 2x more cycles.
Makita built 4-pole maximum torque motor delivers 1,280 in. lbs. of efficient torque in a
compact size.
50% more compact design at only 5-3/4" long and weighs only 3.3 lbs. for less operator
fatigue
LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16
firm holding contact terminals (for constant high power)
Makita's proprietary hammer and anvil are made using the highest quality steel and heat
hardened to last longer.
Product Description
Amazon.com Review
We’ve come a long way from sweat and a screwdriver. A hundred years ago, builders would
never have envisioned a tool as powerful and efficient as this one. Heck, even 20 years
ago. Science has ushered battery technology along, and the LXT Lithium-Ion system that
powers this impact driver has a ton of advantages over standard NiMH or NiCad batteries.
The Lithium-Ion technology means 1,400 battery life cycles, longer run time, lighter weight,
a great reduction in the self-discharge rate and built-in shock-absorbing features to
protect your battery.
But perhaps the coolest innovation is what Makita calls its 45-minute Optimum Charger. It
actually talks to the batteries it charges throughout the cycle, using a built-in memory chip
in the battery and, believe it or not, a CPU chip in the charger itself, which analyzes the
data stored in the battery chip to decide on the best charging method at that time.
Slide one of these batteries onto the supremely designed impact driver and you’ll be
amazed at what you can do. Despite its size (for the record, it’s 5-3/4 inches long and
weighs barely 3 pounds), this driver kicks out an unbelievable 1,280 in./lbs. of efficient
torque, a no-load speed of 2,300 rpm and 3,200 blows per minute, putting it way out in front
of the pack. We really like the integrated worklight, too. It illuminates as soon as you pull
the trigger, and it stays on for 10 seconds or so after you release the trigger, too – a handy
little feature.
Makita always made ergonomically positive tools that feel good in your hand and take the
strain off your body, and this one’s no exception. The slightly curved grip is so
comfortable, and because it’s super compact and lightweight, this driver’s an absolute
pleasure to run. -- Kris Jensen-Van Heste
Features:
Makita built, 4-pole maximum torque motor delivers 1,280 in. lbs. of efficient torque in a
compact size.
50% more compact design at only 5-3/4" long and weighs only 3.3 lbs. for less operator
fatigue.
Ergonomic shape fits like a glove with even pressure and easy control.
LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16
firm holding contact terminals (for constant high power).
30-minute rapid charger and battery communicates throughout the charging process using
the built-in chip in the battery and built-in CPU chip in the charger. The Charger also uses
"Active 3 Control" for current control, thermal control & voltage control.
Charger has a built-in fan to cool the battery to produce more lifetime work.
Built-in L.E.D. light for more illuminated work.
Makita proprietary hammer and anvil are made using the highest quality steel and heat
hardened to last longer.
Electric brake for immediate stops and minimizes kickback.
Two-piece armature and field along with externally accessible brushes for serviceability
and longer motor life.
3-Year warranty.
Makita Impact Driver BTD140 - 18V LXT Lithium-Ion
Cordless Impact Drivers Kit
In The Box
2 LXT Lithium-Ion 3.0Ah batteries (194205-3)
45-minute optimum charger (DC18RA)
Tool case (824753-5)
Specifications
Capacity Hex Shank 1/4
No Load RPM 0-2,300
Impacts/Min.(IPM) 0-3,200
Torque (in.-lbs.) 1,280
Watt Hours 54.0
Battery (Ah) 3.0 (Li-Ion)
Length 5-3/4"
Net Weight (lbs. w/battery) 3.3
Cordless Impact Drivers Kit
In The Box
2 LXT Lithium-Ion 3.0Ah batteries (194205-3)
45-minute optimum charger (DC18RA)
Tool case (824753-5)
Specifications
Capacity Hex Shank 1/4
No Load RPM 0-2,300
Impacts/Min.(IPM) 0-3,200
Torque (in.-lbs.) 1,280
Watt Hours 54.0
Battery (Ah) 3.0 (Li-Ion)
Length 5-3/4"
Net Weight (lbs. w/battery) 3.3
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
