 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Makita DPC6410 Gas Cut Off Saw Gas Power Concrete Cutter |
Makita DPC6410 Gas Cut Off Saw Gas Power Concrete Cutter
Features
Five-stage, foam-paper-nylon system with Advanced Directional Air Flow provides very clean air for better saw
performance
Improved ignition system with larger flywheel and rare earth magnets for more power
Reinforced aluminum blade guard with 70° range of limitless positioning using a marked knob handle
Starter grip and decompression valve located on the same side for faster starting
Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly
adjacent to curb edges, walls or directly above the ground
Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
On-Off-Choke operating switch on a single lever for operator convenience
Improved exhaust emissions are EPA Phase II compliant while maintaining power and performance
Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank
Specifiactions
Engine
Displacement: 3.9 cu.in. (64cc.)
Maximum power: 4.4 HP/3.2 kW
No load speed: 9,350 RPM
Fuel
Fuel mixture: 50:1
Fuel tank capacity: 37 oz.
Blades
Maximum spindle speed: 4,300 RPM
Wheel diameter: 14"
Arbor: 20mm
Maximum cutting depth: 3-13/16"
General
Net weight: 21.4 lbs.
Shipping Weight: 28.00 lbs.
Technical Details
Improved 5-Stage air filtration system is 80% larger that before.
Microchip controlled carburetor adjusts to work load.
Quick-action guard adjustment and easy cutting arm position change.
Compression release valve for easy starting.
Single knob access to primary air filter and spark plug.
Product Description
From the Manufacturer
The Makita DPC6410 12" power cutter offers a fresh new design that enhances performance and provides greater
operator comfort. This 64cc power pack is loaded with new technological innovations such as the micro-chip
controlled carburetor that compensates engine timing to work load. The new and improved 5-stage air filtration
system has been enlarged by 80% to ensure cleaner air for better performance, even in the dustiest conditions.
Better filtration means less down time for maintenance and more production time. Makita also beefed up the
aluminum blade guard with pressure plates for reduced vibration and wear. The DPC6410 is equipped with a spring
tensioned belt adjustment w/gauge to always ensure proper belt tensioning. Compression release, single knob
access to primary air filter and spark plug and a 2-mass dampening system for reduced vibrations makes this the
industry leader when it comes to Power Cut saws. You expect the best from Makita - and you get it.
Product Description
Makita DPC6410 12", 64cc Power Cutter FEATURES: Five-stage, foam-paper-nylon system with Advanced Directional
Air Flow provides very clean air for better saw performanceReinforced aluminum blade guard with 70° range of
limitless positioning using a marked knob handleImproved ignition system with larger flywheel and rare earth
magnets for more powerCutting arm position simply changes from center position to flush (outboard) position
allowing cuts directly adjacent to curb edges, walls or directly above the groundStarter grip and decompression
valve located on the same side for faster startingOn-Off-Choke operating switch on a single lever for operator
convenienceCushioned operator grips with 4 vibration-absorption rubber buffers for increased operator
comfortWater kit is assembled to saw and can be used with garden hose, gravity tank or pressure tankImproved
exhaust emissions are EPA Phase II compliant while maintaining power and performance INCLUDES: 12" Cut-off
wheel (965-210-621)Universal wrench (941-719-140)Torx wrench (940-827-000)Screwdriver (944-340-001)Adaptor
Ring (22 mm to 1") (394-228-120) SPECIFICATIONS: Engine Displacement (cu.in.)3.9 Max. power (HP)4.4 No Load
RPM9,350 Fuel Fuel mixture501 Fuel tank capacity (oz.)37 Blades Max. spindle speed4,300 Wheel diameter14"
Arbor1" (w/adaptor) Max. cutting depth3-13/16" Net Weight (lbs.) 21.4 Shipping Weight (lbs.) 27.40 UPC Code
088381063586
Features
Five-stage, foam-paper-nylon system with Advanced Directional Air Flow provides very clean air for better saw
performance
Improved ignition system with larger flywheel and rare earth magnets for more power
Reinforced aluminum blade guard with 70° range of limitless positioning using a marked knob handle
Starter grip and decompression valve located on the same side for faster starting
Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly
adjacent to curb edges, walls or directly above the ground
Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
On-Off-Choke operating switch on a single lever for operator convenience
Improved exhaust emissions are EPA Phase II compliant while maintaining power and performance
Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank
Specifiactions
Engine
Displacement: 3.9 cu.in. (64cc.)
Maximum power: 4.4 HP/3.2 kW
No load speed: 9,350 RPM
Fuel
Fuel mixture: 50:1
Fuel tank capacity: 37 oz.
Blades
Maximum spindle speed: 4,300 RPM
Wheel diameter: 14"
Arbor: 20mm
Maximum cutting depth: 3-13/16"
General
Net weight: 21.4 lbs.
Shipping Weight: 28.00 lbs.
Technical Details
Improved 5-Stage air filtration system is 80% larger that before.
Microchip controlled carburetor adjusts to work load.
Quick-action guard adjustment and easy cutting arm position change.
Compression release valve for easy starting.
Single knob access to primary air filter and spark plug.
Product Description
From the Manufacturer
The Makita DPC6410 12" power cutter offers a fresh new design that enhances performance and provides greater
operator comfort. This 64cc power pack is loaded with new technological innovations such as the micro-chip
controlled carburetor that compensates engine timing to work load. The new and improved 5-stage air filtration
system has been enlarged by 80% to ensure cleaner air for better performance, even in the dustiest conditions.
Better filtration means less down time for maintenance and more production time. Makita also beefed up the
aluminum blade guard with pressure plates for reduced vibration and wear. The DPC6410 is equipped with a spring
tensioned belt adjustment w/gauge to always ensure proper belt tensioning. Compression release, single knob
access to primary air filter and spark plug and a 2-mass dampening system for reduced vibrations makes this the
industry leader when it comes to Power Cut saws. You expect the best from Makita - and you get it.
Product Description
Makita DPC6410 12", 64cc Power Cutter FEATURES: Five-stage, foam-paper-nylon system with Advanced Directional
Air Flow provides very clean air for better saw performanceReinforced aluminum blade guard with 70° range of
limitless positioning using a marked knob handleImproved ignition system with larger flywheel and rare earth
magnets for more powerCutting arm position simply changes from center position to flush (outboard) position
allowing cuts directly adjacent to curb edges, walls or directly above the groundStarter grip and decompression
valve located on the same side for faster startingOn-Off-Choke operating switch on a single lever for operator
convenienceCushioned operator grips with 4 vibration-absorption rubber buffers for increased operator
comfortWater kit is assembled to saw and can be used with garden hose, gravity tank or pressure tankImproved
exhaust emissions are EPA Phase II compliant while maintaining power and performance INCLUDES: 12" Cut-off
wheel (965-210-621)Universal wrench (941-719-140)Torx wrench (940-827-000)Screwdriver (944-340-001)Adaptor
Ring (22 mm to 1") (394-228-120) SPECIFICATIONS: Engine Displacement (cu.in.)3.9 Max. power (HP)4.4 No Load
RPM9,350 Fuel Fuel mixture501 Fuel tank capacity (oz.)37 Blades Max. spindle speed4,300 Wheel diameter14"
Arbor1" (w/adaptor) Max. cutting depth3-13/16" Net Weight (lbs.) 21.4 Shipping Weight (lbs.) 27.40 UPC Code
088381063586
Makita DPC6410
Gas Cut Off Saw Gas Power Concrete Cutter
In The Box
12" Cut-off wheel
Universal wrench
Torx wrench
Screwdriver
Adaptor Ring (22 mm to 1")
Gas Cut Off Saw Gas Power Concrete Cutter
In The Box
12" Cut-off wheel
Universal wrench
Torx wrench
Screwdriver
Adaptor Ring (22 mm to 1")
| Makita DPC6410 Gas Cut Off Saw Gas Power Concrete Cutter |
| Makita DPC6411 Gas Cut Off Saw Gas Power Concrete Cutter |
| Makita DPC7310 Gas Cut Off Saw Gas Power Concrete Cutter |
| Makita DPC7311 Gas Cut Off Saw Gas Power Concrete Cutter |
| Makita DPC8112 Gas Cut Off Saw Gas Power Concrete Cutter |
| Makita 4112H Electric Cut Off Saw Angle Concrete Cutter |
| Makita 4114 Electric Cut Off Saw Angle Concrete Cutter |
