 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Makita Miter Saw LS1013L 10" Dual Slide Compound Miter Saw with Laser |
Makita Miter Saw LS1013L
10" Dual Slide Compound Miter Saw with Laser
Features
Built-in laser clearly indicates line of cut with micro fine adjustments; independent switch
allows laser to be seen with and without the blade rotating
Dual steel rails with dual linear ball bearings ensures stable, accurate and vibration-free
cutting
Powerful, direct drive 15 AMP motor never slips or bogs down
9 positive stops at 15°, 22.5°, 31.6°, 45° left or right and 0° for the most common miter cuts;
additional positive stop at 33.9° left.
Electronic speed control maintains constant speed under load for smooth cutting; soft start
feature for smooth startups
Single cast aluminum base with built-in wrench storage for easy access
Smooth easy slide system allows cross cuts up to 4 x 12 material
Large turn base and adjustable pivot fence for supporting larger stock
Product Description
Amazon.com Product Description
Innovative engineering and quality construction come together in the Makita LS1013L 10-
in. slide-compound power miter saw. This professional-duty machine is a dual-bevel saw
that tilts 45 degrees to the left and to the right, allowing you to make bevel cuts without
having to flip around the board. Its oversized aluminum worktable rotates 45 degrees to
the left and 52 degrees to the right for miter cuts. Set both the bevel and miter angles to
make compound-angle cuts, such as when installing crown molding.
The saw also has a built-in laser that clearly highlights cut line for quick, safe, accurate
cuts. However, unlike most miter saws, the laser on this Makita model is mounted above
the blade, not to the arbor. That means you don’t have to turn on the saw to activate the
laser. Another nice feature is that the laser is independently switched, so you can turn it on
or off whenever you’d like.
The saw carriage slides on two precision-ground steel rails that are fitted with ball bearing
guides. The result is a vibration-free smooth-rolling saw that produces precise, consistent
cuts, even at the outer limits of the slide mechanism. By the way, this 49-pound tool can
crosscut a 2-by-12 and bevel-cut boards up to 3-5/8 inch thick. The LS1013L has a souped-
up 15-amp, 3,700-rpm direct-drive motor that transfers cutting power to the blade much
more efficiently than typical belt-driven saws.
The saw comes with a dust-collection bag, hold-down vise, two extension wings, 70-tooth
carbide-tipped saw blade and blade wrench. This versatile saw can handle a wide range of
carpentry jobs from house framing and deck building to cabinetmaking and interior trim
work. -- Joseph Truini
From the Manufacturer
Built-In Laser Precision Clearly Indicates Line of Cut to the Left or Right Side of the Blade
with Micro-Fine Adjustments. Independent switch allows laser to be seen with and without
the blade rotating. Dual rails with linear ball bearings for accurate cutting. Electronic speed
control maintains constant speed under load for smooth cutting. Soft-start Technology for
smooth start-ups make for less wear-and-tear on the motor. Powerful 15 Amp motor with
angular head design to allow bevel cutting 45degrees right. Great for woodworking,
carpentry, cabinetry, deck building, framing, furniture making, and many other applications.
10" Dual Slide Compound Miter Saw with Laser
Features
Built-in laser clearly indicates line of cut with micro fine adjustments; independent switch
allows laser to be seen with and without the blade rotating
Dual steel rails with dual linear ball bearings ensures stable, accurate and vibration-free
cutting
Powerful, direct drive 15 AMP motor never slips or bogs down
9 positive stops at 15°, 22.5°, 31.6°, 45° left or right and 0° for the most common miter cuts;
additional positive stop at 33.9° left.
Electronic speed control maintains constant speed under load for smooth cutting; soft start
feature for smooth startups
Single cast aluminum base with built-in wrench storage for easy access
Smooth easy slide system allows cross cuts up to 4 x 12 material
Large turn base and adjustable pivot fence for supporting larger stock
Product Description
Amazon.com Product Description
Innovative engineering and quality construction come together in the Makita LS1013L 10-
in. slide-compound power miter saw. This professional-duty machine is a dual-bevel saw
that tilts 45 degrees to the left and to the right, allowing you to make bevel cuts without
having to flip around the board. Its oversized aluminum worktable rotates 45 degrees to
the left and 52 degrees to the right for miter cuts. Set both the bevel and miter angles to
make compound-angle cuts, such as when installing crown molding.
The saw also has a built-in laser that clearly highlights cut line for quick, safe, accurate
cuts. However, unlike most miter saws, the laser on this Makita model is mounted above
the blade, not to the arbor. That means you don’t have to turn on the saw to activate the
laser. Another nice feature is that the laser is independently switched, so you can turn it on
or off whenever you’d like.
The saw carriage slides on two precision-ground steel rails that are fitted with ball bearing
guides. The result is a vibration-free smooth-rolling saw that produces precise, consistent
cuts, even at the outer limits of the slide mechanism. By the way, this 49-pound tool can
crosscut a 2-by-12 and bevel-cut boards up to 3-5/8 inch thick. The LS1013L has a souped-
up 15-amp, 3,700-rpm direct-drive motor that transfers cutting power to the blade much
more efficiently than typical belt-driven saws.
The saw comes with a dust-collection bag, hold-down vise, two extension wings, 70-tooth
carbide-tipped saw blade and blade wrench. This versatile saw can handle a wide range of
carpentry jobs from house framing and deck building to cabinetmaking and interior trim
work. -- Joseph Truini
From the Manufacturer
Built-In Laser Precision Clearly Indicates Line of Cut to the Left or Right Side of the Blade
with Micro-Fine Adjustments. Independent switch allows laser to be seen with and without
the blade rotating. Dual rails with linear ball bearings for accurate cutting. Electronic speed
control maintains constant speed under load for smooth cutting. Soft-start Technology for
smooth start-ups make for less wear-and-tear on the motor. Powerful 15 Amp motor with
angular head design to allow bevel cutting 45degrees right. Great for woodworking,
carpentry, cabinetry, deck building, framing, furniture making, and many other applications.
Makita Miter Saw LS1013L
10" Dual Slide Compound Miter Saw with Laser
INCLUDES:
10’’ x 70T Carbide-Tipped Blade (A-93550)
Vertical Vise (122538-6)
Dust Bag (122523-9)
2 ea. Extension Wing (322932-4)
Triangular Rule (762001-3)
Socket Wrench #13 (782212-4)
Specifications
Blade Diameter 10"
Arbor 5/8"
No Load RPM 3,700
AMPS 15.0
Size(L x W x H) 28-1/8" x 20-1/2" x 25-1/4"
Net Weight (lbs.) 48.5
Shipping Weight (lbs.) 60.0
UPC Code 088381-06639-6
10" Dual Slide Compound Miter Saw with Laser
INCLUDES:
10’’ x 70T Carbide-Tipped Blade (A-93550)
Vertical Vise (122538-6)
Dust Bag (122523-9)
2 ea. Extension Wing (322932-4)
Triangular Rule (762001-3)
Socket Wrench #13 (782212-4)
Specifications
Blade Diameter 10"
Arbor 5/8"
No Load RPM 3,700
AMPS 15.0
Size(L x W x H) 28-1/8" x 20-1/2" x 25-1/4"
Net Weight (lbs.) 48.5
Shipping Weight (lbs.) 60.0
UPC Code 088381-06639-6
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
